The dumbbell cutter哑铃裁刀

The dumbbell cutter哑铃裁刀  

Orthogonal cutting knife, torn film cutting knife, the rubber cutting knife, plastic cutting knife, dumbbell and cutting knife, test tools, dumbbell cutter
: GB/T 1041; GB/T528; GB/T529; GB/T 8083. GB/T 15340, ASTM standards, etc
And other specifications cutter are available:
1, 2 * 35 rubber dumbbell cutting knife
2, 3 * 100 plastic, pipe dumbbell cutting knife 哑铃裁刀
3, 4 * 75 rubber, cables dumbbell cutting knife 哑铃裁刀
4, 4 * 50 rubber, cable dumbbell cutting knife  哑铃裁刀
5, 5 * 56 dumbbell cutting knife
6, 6 * 115 rubber, plastic dumbbell cutting knife 哑铃裁刀
7, 10 * 100 dumbbell cutting knife
8, 10 * 120 plastic dumbbell cutting knife
Article 9, 15 * 150 straight knife
10 and 13 * 152 porous dumbbell cutting knife
Special specifications cutter can be customized to map (material has special requirements, please contact us )
For the cutting and maintenance:
Should be regular maintenance and maintenance of the cutting blade, blade dull, because its blade edge or will make the samples with defects, affect the test result. The cutting edge position when not in use should be placed on the soft gelatin sponge, or no contact with any surface edge areas.
The cutting should be stored in a dry environment and coated with protective oil, prevent the cutting knife is corrosion.
Should protect the blade, when used in the sample below mat is suitable for hard and soft cover tape or high quality board edge protection from damage. Edge should be regularly
Grinding to stay sharp.
Note: the cutting blade mouth maintenance is very important. Can use the grindstone often slightly edge grinding and repair, and through a series of test samples after breaking point to evaluate the condition of the blade. When fracture of the specimen when removed from the holder of testing machine, check whether sample has always in the same point, or close to the same point of fracture on trend, if there is a trend that shows that the blade on this particular part may be dull, there are gaps or edge.
Cutting lubrication:
Using dilute washing liquid lubrication, cutting or sample surfaces dry after use of lubricant should be paid attention to the metal surface, to prevent rusting parts.

The dumbbell cutter哑铃裁刀